DGC adapter connector |
Material:
1 Colloid: PBT, UL94V-0.
2 terminals: copper alloy.
3 Coating: according to the requirements set.
ELECTRICAL CHARACTERISTICS:
Rated current: 3A.
2 Withstanding voltage: 1000Vr.m.s, 1mA, 60s.
3 Insulation resistance: ≥ 5000MΩ.
4 Contact resistance: ≤ 25mΩ.
Mechanical properties:
Insertion force: ≤2.0N / pin.
2 pull-out force: ≥ 0.2N / pin.
3 overall insertion force: ≤ 156N.
4 Overall pulling force: 14.5N ~ 111N.
5 life times: 500 times.
Operating temperature:
-40 ° C to + 100 ° C.
Features:
Mainly applicable to communications and electronic data processing equipment and use.
Similar to an electronic device or device. Frequency less than 3MHz, the product.
In line with IEC60807 international standards, with similar products at home and abroad exchange.
This connector is a high-density rectangular connector. |
|
